129-pant-tilt-mount

SS PAN TILT

Stainless steel pan tilt units for CCTV use

Pan tilt drives with ultimate protection against harsh environment. Completely constructed out of 316L stainless steel. IP67 protection, 25kg load. Will take all housings from 129 to 204 models.

Innovative gearbox system offers extra smooth and precise movement using 24V DC motors. Ideal for marine, industrial, chemical plants, and food industry. Much better and may be the only choice where standard aluminum P/T units would not last very long. PP, Pre Positioning is standard. Takes Pelco D protocol for easy integration.

stainless steel Pan/Tilt unit datasheet

 

!

VSPT250

VSPT250
Weight: kg
SSPT stainless steel Pan Tilt unit

Stainless steel (AISI316) variable speed Pan & Tilt unit, 24VDC motors, IP66-IP67, with side mounting bracket for housing.
Cable entry 2x M20x1,5.
Suitable for 101, 129 and 168 series camera housings or third-party camera housings.
Pre-wired for Rx250DC telemetry receiver. (receiver not included)
Electronic end-stop limits controlled by Rx250DC telemetry receiver. Alternatively mechanical end stop limits externally adjustable (upon request).

Dual camera unit shown 

VSPT250H

VSPT250H
Weight: kg
VSPT stainless steel Pan Tilt

Stainless steel (AISI316) variable speed Pan & Tilt unit, 24VDC motors, IP66-IP67, for single housing (129 series) application.
Internal cable channel between camera housing and P&T.
Cable entry: 2x M20x1,5 on the P&T side..
Camera housings (129 series) is not included.
Pre-wired for Rx250DC telemetry receiver.  (receiver not included)
Electronic end-stop limits controlled by Rx250DC telemetry receiver.

Dual camera unit shown.

VSPT250F

VSPT250F
Weight: kg
Stainless steel camera Pan Tilt
Stainless steel (AISI316) variable speed Pan & Tilt unit, 24VDC motors, IP66-IP67, for single housing (129 series) application. With base mount junction box.
Internal cable channels between camera housing and P&T, and between P&T and base mount junction box.
Fixed cable entry 1x M25x1,5 on the junction box.
Camera housings (129 series) is not included.
Pre-wired for Rx250DC telemetry receiver (receiver not included).
Electronic end-stop limits (controlled by Rx250DC telemetry receiver).

VSPT250D

VSPT250D
Weight: kg
Stainless steel camera pan tilt
Stainless steel (AISI316) variable speed Pan & Tilt unit, 24VDC motors, IP66-IP67, for dual housing (129 series) application.
With base mount junction box.
Internal cable channels between camera housings and P&T, and between P&T and base mount junction box.
Fixed cable entry 1x M25x1,5 on the junction box.
Camera housings (129 series) are not included.
Pre-wired for Rx250DC telemetry receiver (receiver not included).
Electronic end-stop limits (controlled by Rx250DC telemetry receiver).

RX250DC

RX250DC
Weight: kg
Receiver Driver controller
Telemetry controller, RS485, Pelco-D protocol for control of variable speed Pan&Tilt (VSPT250 series), motorized zoom lens, washer and wiper. Includes 12V DC, 1A output.
Requires 24V~ supply.

SSBK250

SSBK250
Weight: kg
Pan Tilt wall mount bracket
Telemetry controller, RS485, Pelco-D protocol for control of variable speed Pan&Tilt (VSPT250 series), motorized zoom lens, washer and wiper. Includes 12V DC, 1A output.
Requires 24V~ supply.

SSPM250

SSPM250
Weight: kg
Stainless steel pole mount for P/T unit
Stainless steel (AISI316) pole mount adapter for SSBK250 bracket

PT variations